How to use the eligibility checker
- Pick the method you plan to apply for. Run the checker once for each method.
- Choose the education row that matches your diploma or transcripts.
- Enter the days of Level II (or comparable) work your signed records already show in that method.
- Enter the qualifying days you expect to work a month and the date to count from.
ASNT NDT Level III experience by education
| Your education | Months | Days |
|---|---|---|
| Four-year degree in engineering or physical science | 12 | 252 |
| Two full academic years of engineering or physical science study, passed | 24 | 504 |
| No college | 48 | 1,008 |
- A day is at least seven hours, worked on one day or added up. 1,400 logged hours make 200 days.
- The work is in NDT, under qualified supervision and in the method you apply for. ASNT's program document, section 4.2, describes it as experience beyond the Level II requirements in each method.
- ASNT's table pairs 12 months with 252 days, which works out to 21 days a month. Use your own pace if you work fewer.
How the date is projected
Days short is the table figure minus the days you have documented, and never less than zero. The checker divides the days short by your qualifying days a month, rounds up to whole months, and adds those months to your start date. 152 days at 20 a month is 7.6 months, so it counts 8. Your records still have to show the days before you apply.
Documents ASNT accepts and does not accept
- Accepted, signed by the employer: inspection logbooks, inspection reports, employer or third-party certificates or certification records, and HR records.
- What they must state: your level of qualification or your Level II duties, and the number of days you worked at Level II or comparable responsibility.
- Per method: send signed records for each method you apply for.
- Self-employed: signed statements from at least two customers.
- Not accepted: training certificates, qualifications not issued by an employer, and Level I certificates.
- College: if you use education to qualify, upload your diploma or transcripts. Anything not in English needs an English translation.
The table and document rules are from ASNT's NDT Level III certification page and its Level III program document, read 19 Nov 2026. The day and month counts are our own arithmetic. The ASNT NDT Level III certification guide covers the exams, fees and the steps to apply.
Worked example 1: no college, UT
Invented numbers. A UT Level II with no college needs 1,008 days. Signed records show 640 UT days, so the technician is 368 days short. At 18 qualifying days a month that is 20.4 months, rounded up to 21 months. Counting from 1 December 2026, the projected date is 1 September 2028.
Worked example 2: a degree, and two methods
Invented numbers. An engineer with a four-year degree needs 252 days in each method. MT records show 100 days: 152 short, and at 20 days a month that is 8 months, so from 15 January 2027 the projected date is 15 September 2027. The same engineer has 260 PT days, so PT already meets the row while MT waits.
These are original date examples, not exam questions.
Common mistakes
- Adding days across methods. UT days do not cover an MT application. Each method stands on its own records.
- Sending a training certificate. ASNT does not accept training certificates or Level I certificates as experience.
- Counting short shifts as days. A day is seven hours. Add the hours up, then divide by seven.
- Leaving records to the end. Ask for signed records as you go, so the days are on paper when you reach them.
Already certified? The ASNT NDT Level III renewal calculator covers the five-year renewal. For how Level II work leads there, see NDT Level 2 jobs and the career path.
ASNT NDT Level III eligibility questions
What are the ASNT NDT Level III experience requirements?
They depend on your education. A four-year degree in engineering or physical science needs at least 12 months (252 days). Two full academic years of engineering or physical science study, passed, need at least 24 months (504 days). With no college you need at least 48 months (1,008 days).
What counts as a day of experience?
At least seven hours, worked on one day or added up over several. The work must be in NDT, under qualified supervision and in the method you apply for, so 1,400 logged hours in UT make 200 UT days.
What documents prove my Level II experience?
Records signed by the employer, such as inspection logbooks, inspection reports, employer or third-party certification records, or HR records. They must state your level of qualification or your Level II duties, and the number of days you worked at Level II or comparable responsibility, for each method.
What documents does ASNT not accept?
Training certificates, qualifications not issued by an employer, and Level I certificates. Every document must be in English or come with an English translation. If you cannot reach records older than 10 years, ASNT asks for a signed attestation letter with as much detail as you can give.
I am self-employed. How do I document my experience?
ASNT asks for signed statements from at least two customers. Each method you apply for still needs its own record of your Level II days.
Angle Beam is not affiliated with ASNT. This tool applies ASNT's published experience table to the numbers you enter and gives no ruling on any application.