ASNT vs PCN vs CGSB NDT Level 2 Certification

ASNT's NDT Level II program is employer-based certification with ASNT written exams. PCN, run by BINDT in the UK, and Canada's scheme, run by Natural Resources Canada to CAN/CGSB-48.9712 (Canada's adoption of ISO 9712), are central certifications under ISO 9712. Which one you need depends on the country you work in and on your employer or the code your job is built to. Here is how the three compare, using each body's own pages, and which one a US technician usually needs.

ASNT, PCN and CGSB side by side

Every row below comes from the body's own pages, checked 20 November 2026. The NRCan column shows UT Level 2, because NRCan lists exam parts method by method.

ASNT NDT Level IIPCN (BINDT)CGSB (NRCan)
Who runs itASNT Certification ServicesThe British Institute of Non-Destructive Testing (BINDT), which owns and operates the PCN schemeNatural Resources Canada's National Non-Destructive Testing Certification Body (NDTCB)
Built onSNT-TC-1A, ASNT's recommended practice for employer-based certificationISO 9712, with BINDT accredited by UKAS to ISO/IEC 17024CAN/CGSB-48.9712-2022, Canada's identical adoption of ISO 9712
TypeEmployer-based: ASNT runs the written examsCentral (third-party) certificationCentral certification by a federal government program
Written exams at Level 2At least one General and one Specific, through ASNT at a testing centerGeneral and Specific elements, plus an NDT instruction writing elementUT: General (1 hour 20 minutes) and an EMC sector paper (3½ hours)
Practical examYour employer, under its written practicePart of the PCN examinationPart of the NRCan examination (UT: 2½ days)
Where you sit the examsA testing center for the written examsBINDT authorized qualifying bodies and their exam centers, in the UK and abroadAuthorized exam centers across Canada, with written exams computer-based and proctored in person
Where its own pages say it is usedWidely across US industry and in regions that accept employer-based certificationRecognized under a European mutual recognition agreement, and accepted in a number of other countriesInspection of metals and materials in components and structures used in Canada's natural resources industries

Neither ASNT NDT Level II nor PCN makes you an authorized inspector on its own. Under ASNT NDT Level II your employer finishes the certification, and BINDT's PCN rules say only the employer can authorize a certificate holder to work.

Who runs each scheme

ASNT. ASNT runs two Level II programs. ASNT NDT Level II follows SNT-TC-1A, the recommended practice in which an employer sets up a written practice and qualifies its own people. ASNT 9712 Level II is a separate program built to meet ISO 9712, with a hands-on exam that ASNT runs. Our ASNT vs employer certification guide compares those two with employer certification in detail.

PCN. BINDT owns and operates the PCN scheme from the UK. It is accredited by UKAS as a personnel certification body to ISO/IEC 17024, to certify people against ISO 9712. PCN examinations are prepared and run by authorized qualifying bodies (AQBs) that BINDT authorizes, and BINDT's October 2026 exam availability list includes centers in the UK, India, Singapore, the UAE, Canada and Houston, Texas, among others.

CGSB, run by NRCan. "CGSB certification" is the name people use for Canada's scheme, and NRCan's own pages use it too. The certifier is the NDTCB at Natural Resources Canada, a federal government program that issues certifications to CAN/CGSB-48.9712 and keeps every certification decision for itself. The Canadian General Standards Board only published the standard. The Government of Canada wound down CGSB's operations from 1 April 2026, and NRCan's statement of 30 April 2026 says its certification services carry on without interruption and the standard stays valid while NRCan takes over its upkeep.

Try one question

Question 1 of the free 10-question check on UT L2. No signup. About 13 minutes. Most checks include 2 calculation questions, with a calculator on the page. Then ask Echo, the AI study assistant, why the answer is right and the others are wrong.

Question 1 of 10 · free checkUntimed

Discontinuity Detection

A planar reflector gives its highest echo amplitude when the beam strikes it

Press A-D or 1-4 to choose an answer while this question is on screen.

Choose an answer to begin

Who issues the certificate

This is the real difference between the schemes, more than the exams.

  • ASNT NDT Level II. ASNT administers the General and Specific written exams. Your employer carries out the vision test, the practical exam and any job-specific exam its written practice needs to finish the certification process.
  • PCN. BINDT issues the certificate once you meet the requirements for the method, level and sector. BINDT's own description contrasts this with employer-based schemes: a PCN certificate shows conformance to an international standard. It still does not authorize you to work. BINDT says that authority can only come from your employer.
  • CGSB (NRCan). The NDTCB issues the certification, and NRCan states it is solely responsible for granting, maintaining and withdrawing it. Your employer still plays a part: it attests to your experience at each level on the application form.

The exams each body lists

ASNT NDT Level II. ASNT's program page says an initial applicant must pass at least one General exam and one Specific industry exam, taken through ASNT at a testing center. The practical is your employer's. The requirements guide lists the training and experience days for each method.

PCN Level 2. BINDT's general requirements document (PCN24/GEN, Issue 4, January 2026) lists four elements at Level 2: a general exam, a specific exam, a practical exam and an NDT instruction writing element. The general and specific papers are closed-book and mostly multiple choice. In the specific paper you are given the codes and specifications the questions refer to.

CGSB (NRCan) Level 2. NRCan's initial exam charts list, for UT Level 2, a written General exam of 1 hour 20 minutes, a written EMC sector exam of 3½ hours and a practical of 2½ days. EMC is NRCan's Engineering, Materials and Components sector, which includes castings, forgings, wrought products and welds. Other methods have their own times on the same page.

Where each one is asked for

ASNT's own comparison puts it plainly. ASNT NDT is widely used across US industry and in regions that accept employer-based certification. ISO 9712 certification, which ASNT offers through its 9712 program, is commonly required for international work, including much of the EU and Canada.

BINDT says PCN is registered under a European multilateral mutual recognition agreement managed by the European Federation for NDT, and that PCN certificates are accepted as evidence of competence in a number of countries. It also states that PCN certification in the welding and pre- and in-service inspection sectors meets the UK's Pressure Equipment (Safety) Regulations 2016.

NRCan describes its program as certifying the people who inspect metals and materials used in Canada's natural resources industries. If you already hold a certificate from another scheme, NRCan may accept it as proof of earlier training and experience, but you still sit NRCan's written and practical exams for the method and level.

Which one a US technician usually needs

For most US jobs, the answer is employer certification under the company's written practice, often with ASNT NDT Level II as the written credential. That matches ASNT's own description of where its NDT program is used. PCN or CGSB comes into play when the work is abroad or for a client whose contract names an ISO 9712 certificate, and the employer or the code on the job decides that, not the technician.

A practical order:

  1. Ask your employer or the job posting which certificate it wants. Get the answer in writing.
  2. If it is employer certification, read the written practice and find out which written exams it accepts, such as ASNT's General and Specific exams.
  3. If you will work outside the US, compare ASNT 9712 with the scheme of the country you are going to. BINDT and NRCan both publish their exam centers and requirements.
  4. Price the route you picked. For ASNT's fees, add up your plan with the ASNT exam cost calculator or read the ASNT NDT Level 2 cost breakdown. BINDT lists PCN charges in its document PCN24/PSL35, and NRCan has a fees page for its exams.

Start with a free check

Whichever scheme you sit, the UT theory has to be solid before exam day. Take the free 10-question check for UT General: it needs no signup, explains every answer and shows which topics to drill first. The full course adds timed practice exams, a lesson for each published topic and a study plan built from your exam date. Take the free 10-question check.

FAQ

Is PCN accepted in the US?

There is no single US rule. ASNT says employer-based certification is widely used across US industry, so a US employer's written practice and the client's code decide what it accepts. BINDT notes that most employer-based schemes let the employer accept outside exams if they are documented and meet its written practice. Ask before you rely on a PCN certificate for US work.

Is CGSB the same as ISO 9712?

The standard is. CAN/CGSB-48.9712-2022 is Canada's identical adoption of ISO 9712:2021. The certificate is not interchangeable: NRCan says sharing the standard does not make other schemes equivalent by default, and recognition needs an agreement between the certification bodies.

Can I hold ASNT and PCN?

Yes. Nothing on ASNT's or BINDT's pages stops you holding both. Each is applied for, examined and renewed separately, method by method. If your ISO 9712 body is one of ASNT's 9712 Recognition Partners, ASNT also offers a route to have that certificate recognized under ASNT 9712.

Where do our practice questions come from?

Every question is original and written to ASNT's published outline for the Level II General exam. Our course prepares you for ASNT's General written exams. PCN and NRCan write their own papers, so use their syllabuses and exam guides as well if you sit one of their schemes.

Sources

Checked 20 Nov 2026:

This site is independent of ASNT, BINDT and Natural Resources Canada.

Angle Beam editorial team

Free tools for this topic

Keep reading

Your next step

Ready to see where you stand on UT L2?

Free, untimed and scored by domain. No signup. About 13 minutes. Most checks include 2 calculation questions, with a calculator on the page.

Free 10-question check

NDT UT Level II General course. Lessons, timed practice exams and a plan around your exam date.

Get NDT UT Level II General course · $149

More free practice

The free check and the course are on the UT L2 page.

Ask Echo for a plan built around your exam date

Email me the UT L2 study plan

A week-by-week plan from today to your exam, weighted to the published exam outline. It shows here at once and a copy comes by email.