MT vs PT Level 2: which NDT method first?
On carbon and low-alloy steel, magnetic particle testing (MT) finds surface flaws and slightly subsurface ones too. On austenitic stainless steel, aluminum and other nonferrous parts, MT does not work, and of the two methods only liquid penetrant testing (PT) does. The ASNT Level II exams for the two methods have the same format and the same fees, and PT is the shorter route on training and experience days. So the parts your shop inspects decide your first method, and PT gets you to the exam sooner. The material facts come from our NDT methods compared guide, and the exam facts from ASNT's Level II pages.
MT vs PT Level II side by side
| MT Level II | PT Level II | |
|---|---|---|
| Works on | Ferromagnetic metals only | Any nonporous material, magnetic or not |
| Finds | Surface and slightly subsurface flaws | Flaws open to the surface only |
| General exam | 50 items in 2 hours | 50 items in 2 hours |
| Specific exam | 40 items in 2 hours, General Industry or Pressure Equipment | 40 items in 2 hours, General Industry or Pressure Equipment |
| Initial exams fee | $740 members, $820 nonmembers | $740 members, $820 nonmembers |
| Added sector or retake | $370 members, $410 nonmembers, retake after a 30-day wait | $370 members, $410 nonmembers, retake after a 30-day wait |
| Training | 3 days | 2 days |
| Experience in the method | 40 days | 30 days |
| Total NDT experience | 76 days | 58 days |
| General topic list | Ten topics before 15 Dec 2026, five domains after | Four topic headings, no date split |
ASNT defines a day as at least 7 hours, which you can build up over more than one day. The visual acuity, practical and any job-specific exams come from your employer, not ASNT. The full requirements for every method are in NDT Level II requirements by method.
Which to certify in first
Start from the parts on your bench, because the method has to work on them.
- Mostly carbon steel welds, castings, forgings or shafts: MT first. It is fast on ferromagnetic parts and picks up flaws just under the surface that PT cannot reach. Read how magnetic particle testing works to see the job.
- Mostly stainless, aluminum or nonferrous parts: PT first. MT has no use on those materials, so an MT certificate would not cover your work. Read how liquid penetrant testing works.
- A mix of steel and nonferrous parts: PT works on both material groups, as long as the flaw is open to the surface, and its route is shorter. Add MT next for the steel parts where near-surface flaws matter.
- Your employer already runs one method every day: start there. That is the method your experience log grows in fastest, and those days are what ASNT checks.
Both routes cost the same in ASNT fees, so the fee is no tie-breaker. The day counts are. PT asks for 30 days in the method and 58 in total, against 40 and 76 for MT. For how MT and PT compare with UT, RT and VT, read which NDT method to certify in first.
Try one question
Question 1 of the free 10-question check on PT L2. No signup. Then ask Echo, the AI study assistant, why the answer is right and the others are wrong.
Inspection and Evaluation of Indications
A small, star-shaped indication appears at the end of a weld bead. Which discontinuity is most likely?
Press A-D or 1-4 to choose an answer while this question is on screen.
Choose an answer to begin
Doing both
If your shop inspects both steel and nonferrous parts, you may want both. Each method is its own ASNT application, with its own training and experience records, its own General and Specific exams and its own initial exam fee. Keep your method days in separate columns from the start so each application is easy to fill in.
Study them in the order you will sit them. The General exams test different things: MT is about magnetizing the part in the right direction for the flaw, and PT is about choosing the penetrant type and removal method for the part. The MT Level II exam guide and the PT Level II exam guide set out each topic list. If MT is your second method and your exam falls after 15 December 2026, study the five-domain MT outline.
Start with a free check
Take the free 10-question check for the method you are leaning toward. Each check covers that method's General exam, needs no signup and explains every answer. Start the free MT check or start the free PT check.
FAQ
Is magnetic particle better than dye penetrant?
Neither is better everywhere. On ferromagnetic steel, MT also finds slightly subsurface flaws that PT cannot. On austenitic stainless, aluminum and other nonferrous parts, MT does not work and PT does. Pick the one that suits the parts you inspect.
Which NDT certification is quicker, MT or PT?
PT. ASNT asks for 2 training days, 30 days in the method and 58 days of total NDT experience for PT Level II, against 3, 40 and 76 for MT. The exams have the same format and fees.
Can MT be used on stainless?
Not on austenitic stainless steel, because MT works only on ferromagnetic metals. PT is the usual choice there. The FAQ in NDT methods compared covers it.
Does the MT exam change in December 2026?
Yes. ASNT lists ten MT General topics for exams before 15 December 2026 and five domains for exams after it. The exam stays 50 items in 2 hours. The MT outline change guide maps the old topics to the new domains. PT has no date split.
Sources
Show the list
- ASNT NDT Level II Certification, ASNT Certification Services. Used for the fees, the training and experience days and the 7-hour day. Checked 14 Nov 2026.
- ASNT NDT Level II Examinations, ASNT Certification Services. Used for the item counts, times, sectors, the MT outline dates, the PT topics and the 30-day retake wait. Checked 14 Nov 2026.
Ask Echo: Am I ready?
Ask Echo before you buy AI your AI study assistant
See what's on the PT L2 exam, test yourself with 5 quick questions, or find the plan that fits you.
The PT L2 course
Available now · instant accessLearn every General exam topic, from capillary action to process control, then prove it on timed exams.
Instant access. Terms and refunds · Secure checkout by Stripe · Billed by Nori Software
What's inside
- 5modules of lessonsEvery task on the outline
- 3full-length timed exams50 questions in 120 minutes each
- 309practice questionsEach one explained
- 3worked calculationsStep by step
- 1week-by-week study planSet to your exam date
Turn a practice answer into a study step. In untimed practice, ask Echo AI about any question you answer, follow up, then see your weakest topics and what to drill next.
- MT + PT bundle$199$59 less than buying both courses separatelyIncludes the MT L2 and PT L2 courses
Terms and refunds · Secure checkout by Stripe · Billed by Nori Software
- UT, MT and PT bundle$299$108 less than buying the 3 courses separatelyIncludes the UT L2, MT L2 and PT L2 courses
Terms and refunds · Secure checkout by Stripe · Billed by Nori Software
- Question of the dayFree
Every answer comes with a full explanation.
Angle Beam editorial team
Facts come from the sources listed above. If something has changed, tell us and we will correct it.
Your next step
Ready to see where you stand on PT L2?
Free, untimed and scored by domain. No signup.
Free 10-question checkNDT PT Level II General course. Lessons, timed practice exams and a plan around your exam date.
Get NDT PT Level II General course · $129Want a timed run? Take the free 25-question practice test (about 60 minutes). No email needed.
Free tools for this topic
Prefer paper? Free printables
- Print the study checklist (free PDF). Topics to cover, on one printable page. No email.
- Print a class quiz (free PDF). 5 practice questions with an answer key on page 2.
- Print the flashcards as cut-out cards (free PDF). The free flashcard sample, ready to cut and carry.