MT Level II practice: a study routine

Match practice to your exam date

The MT General outline (for exams before 15 December 2026) covers ten topics, including principles, flux fields, discontinuities, current, technique selection, demagnetization, equipment, evaluation and process control. Our course and free check follow the same ten topics, so your practice matches what the outline asks for. ASNT publishes no percentage weights for the outline, so our practice distribution is a study choice, not an exam weighting.

If your appointment is near or after the change, read the MT outline change guide before relying on this topic arrangement. Check ASNT's published outline for your appointment date. General practice also does not cover every requirement of a sector-specific or employer practical examination. The certification comparison explains those separate roles.

Turn each missed answer into a study task

Use a short error log. Record the topic, your original reasoning, what the explanation changed and the action you will take before trying again.

When the explanation exposes a gap in...	Review this next	What you should be able to explain
Principles or flux fields	Magnetism, circular and longitudinal fields	Where the field runs in the part
Discontinuities and current	Leakage fields, orientation and current type	Why the chosen setup suits the indication you are seeking
Technique selection	Head shots, central conductors, coils, prods and yokes	Which field direction the setup produces and what limits its use
Demagnetization	Removing a field and checking the result	What evidence shows the required condition has been reached
Equipment and evaluation	Particles, lighting, indication classification and process checks	Whether the observation is reliable enough to evaluate

These review groups come from the course modules. They are not a claim about how many questions ASNT will assign to each topic.

Review the reasoning before repeating the check

1. Read the explanation for a missed answer without changing your original notes.
2. Identify the first wrong assumption: material, orientation, equipment, process condition or interpretation.
3. Write a corrected reason in one sentence. Include why your original choice did not fit.
4. Review the relevant lesson or reference, then close it and explain the decision again.
5. Return to practice after that explanation is clear. Recognizing the same answer choice on a repeat attempt is weaker evidence than explaining it without the choices.

For field-direction errors, use the MT field and technique workflow. For current calculations, the MT amperage calculator lets you check arithmetic with stated inputs; the procedure and setup still determine which model applies.

What the free check can tell you

The check is untimed, requires no signup and shows explanations. Use its topic results to choose a next lesson. Ten questions are a small sample, so a clean result is not a prediction of your examination result or proof of practical competence. Keep the error log across sessions and look for repeated reasoning errors.

For booking and test-center arrangements, use the ASNT exam-day guide. For training and experience requirements, use NDT Level II requirements.

Sources

Show the list

This study routine follows Angle Beam's MT course modules on magnetism, leakage fields, technique selection, equipment, discontinuities and evaluation. Outline checked 19 October 2026.

• ASNT NDT Level II examinations, the published outline and exam formats.
• ASNT NDT Level II program, the certification program requirements.

Not affiliated with or endorsed by ASNT.